AlloyCover Testimonials

WeatherTech Hard AlloyCover 2019 Toyota Tacoma SR5 Access Cab 4x4

Name: Matt G
Vehicle: 2019 Toyota Tacoma

I have had this Hard Alloy Cover for my 2019 Toyota Tacoma SR5 Access Cab for about 3.5 months (100ish Days). The Cover performs well and meets the description. After a back-to-back car wash there was only minor water entry through the rear corners of the Cover. In terms of 'minor' I mean a few drops of water after inspection of water entry, nothing to worry about. The Cover looks very similar to a shiny Shale Rock texture in terms of color and texture of the Cover. No vibrations during driving and the Cover helps my tacoma in terms of full-efficiency too. I get about 1.2-2.7 more MPG on my Interstate trips to work than before (before = truck had no Cover). As far as visibility of the Cover it's not very visible with it having an on-truck-bed height of about less than half an inch via image I've attached. Installation took about 30 minutes. Highly Recommend.

Very Impressed!

Name: Steve Specht
Vehicle: 2014 Ford F-150

I'm extremely impressed with this cover!! This is a replacement for a Bakflip G2 that only lasted 4 years before it delaminated and absorbed water in the panels. I use my truck every day for work and often have expensive tools stowed in the bed, and the WeatherTech Alloy cover is far superior in quality and security. They also payed attention when designing this cover. The other fold up covers on the market (Bakflip etc...) that rest against the rear of the cab when using the whole pickup bed for large items block your entire view of whats in back, and if your going any distances will also rub the paint on the cab even though they have rubber snubbers. So you can't see if everything is staying secured, unless you pull over to inspect your load. Trust me, it's nerve racking to not be able to see out the back with something big in back. Also to remove the other covers you have to unbolt the assembly from underneath, and the do the same to reattach. Total pain in the butt! To remove the Alloy Cover you simply release the locking mechanism by pulling the cord and presto, the whole cover lifts up and off!! I stow it sideways alongside the bed when hauling large items and when I'm done, simply click it back into place. Lastly, you can close your tailgate with the cover down which you cannot do with the G2, and let me tell you thats a HUGE improvement! I can't tell you how many times I had to stop someone from damaging the Bakflip by shutting my tailgate before lifting the over up. So my advice if you thinking of buying a hard cover, spend a little extra up front for the WeatherTech AlloyCover.

If I can install it anyone can!

Name: George Bolding
Vehicle: 2018 GMC Canyon

Perfect fit, easy install, great finish on exterior side. If I can install it anyone can!


Name: Gary in Indy
Vehicle: 2019 GMC Sierra / Sierra Denali 2500HD / 3500HD

Purchase for my GMC Sierra and very pleased with the product. I did replace the Clamps that secure the unit on. Drilled 8 holes and used stainless bolts (easy to do and took 30 mins). Side liners are now much more secure and don’t move. I have noticed any leaking at all. Thought I’d miss my avalanche but not at all! Hope this helps your decision

Great Bedcover, Would buy again

Name: Brian Kazda
Vehicle: 2014

Purchased after my previous cover, the undercover flex, leaked at every seam. This cover installed quickly, is very low profile and has a nice sleek look. Yesterday was the first rain this cover has seen and after about 12 hours of hard rain here in Illinois, my bed was perfectly dry. The price is a bit more than competitors such as the bakflips or undercovers, but it is attached to the weather tech brand and they definitely produce a quality product. I am not one to write reviews but felt the need to write this one. Great Product, would buy again and would highly recommend to anyone looking for a solid tri-fold bed cover that doesn't leak